Pike Technical Manual
V5.2.0
109
Camera interfaces
Status LEDs
On LED (green)
The green power LED indicates that the camera is being supplied with sufficient
voltage and is ready for operation.
Status LED
The following states are displayed via the LED:
Blink codes are used to signal warnings or error states:
Figure 58: Position of status LEDs
State
Description
Com/S1 (green)
Asynchronous and isochronous data transmission
active (indicated asynchronously to transmission
via the 1394 bus)
Trg/S2 (yellow)
LED on - waiting for external trigger
LED off - triggered / internal sync
Table 22: LED indication
Status LEDs
Yellow
(Trg/S2)
Green
(Com/S1)