Pike Technical Manual
V5.2.0
130
Description of the data path
Channel adjustment with SmartView (
1.5)
Prerequisites:
•
Test sheet with continuous b/w gradient
•
Pike camera with defocused lens
•
Pike color cameras set to RAW8 or RAW16 (debayering: none)
•
In case of using AOI, be aware that the middle vertical line (+/- 20 pixel) is
part of the AOI.
To carry out an adjustment in SmartView, perform the following steps:
1.
In SmartView click
Extras
Adjust channels...
or use
Alt+Ctrl+A
.
The following window opens:
2.
To perform an automatic channel adjustment, click on
Do one-push
adjustment
.
3.
If the adjustment is not sufficient, repeat this step or adjust by clicking the
arrow buttons.
The two channels are automatically adjusted. For the channel adjustment a
region from +/- 20 pixel around the middle vertical is taken into account.
Note
Automatic
adjustment of gain (and offset) is implemented in
SmartView and is not available on register basis.
Figure 69: SmartView: channel adjustment (>1.5 up to 1.9.1)
Note
Program
button is only available for Allied Vision factory.
