Allied Vision Pike F-032B/C, Technical Manual

Page: 13 / 376

Pike Technical Manual V5.2.0
13
Introduction
Introduction
This Pike Technical Manual describes in depth the technical specifications,
dimensions, all camera features (IIDC standard and Allied Vision smart features)
and their registers, trigger features, all video and color formats, bandwidth, and
frame rate calculation.
For information on hardware installation, safety warnings, and pin assignments
on I/O connectors and 1394b connectors read the
1394 Installation Manual .
Document history
Note

Please read through this manual carefully.
We assume that you have read already the 1394 Installation
Manual (see: http://www.alliedvision.com/en/support/tech-
nical-documentation ) and that you have installed the hard-
ware and software on your PC or laptop (FireWire card, cables).
Version Date Remarks
V2.0.0 07.07.2006 New Manual - RELEASE status
PRE_V3.0.0 22.09.2006 Minor corrections
Added Pike F-145
Pike F-210 AOI frame rates corrected: Chapter Pike F-210: AOI
frame rates (no sub-sampling) on page 260
New advanced registers: Chapter Advanced features on page 315
V3.0.1 29.09.2006 Minor corrections
V3.1.0 13.02.2007 Changed camera status register ( Table 156: Advanced register:
Camera status on page 323)
Added description for the following mode Output state follows
PinState bit ( Table 31: Output routing on page 117 )
Added M39-Mount for Pike F-201 and F-421 (Chapter F-Mount on
page 83)
to be continued on next page
Table 1: Document history