AirLive IGR-842PoE, User Manual, Page: 89 / 299

5. Web Management: Monitor of IGR-842POE
AirLive IGR-842POE User Manual
84
9. Modification Buttons :
You can modify each ACE (Access Control Entry) in the table using the following
buttons:
: Inserts a new ACE before the current row.
: Edits the ACE row.
: Moves the ACE up the list.
: Moves the ACE down the list.
: Deletes the ACE.
: The lowest plus sign adds a new entry at the bottom of the ACE listings.
Buttons:
Auto-refresh – Check this box to refresh the page automatically.Automatic
refresh occurs every
Refresh – Click to refresh the page; any changes made locally will be undone.
Clear – Click to clear the counters.
Reset – Click to undo any changes made locally and revert to previously saved
values.
Parameter description:
1. Ingress Port :
Select the ingress port for which this ACE applies.
All : The ACE applies to all port.
Port n : The ACE applies to this port number, where n is the number of the switch
port.
2. Policy Filter :
Specify the policy number filter for this ACE.
Any : No policy filter is specified. (policy filter status is "don't-care".)
Specific : If you want to filter a specific policy with this ACE, choose this value.
Two field for entering an policy value and bitmask appears.
3. Policy Value :
When "Specific" is selected for the policy filter, you can enter a specific policy
value.The allowed range is
0 to 255 .
4. Policy Bitmask :
When "Specific" is selected for the policy filter, you can enter a specific policy
bitmask. The allowed range is
0x0 to 0xff . Notice the usage of bitmask, if the
binary bit value is "0", it means this bit is "don't-care". The real matched pattern is