AirLive IGR-842PoE, User Manual, Page: 49 / 299

5. Web Management: Monitor of IGR-842POE
AirLive IGR-842POE User Manual
44
Parameter description:
1. Client :
The management client for which the configuration below applies.
2. Methods :
Method can be set to one of the following values:

no: Authentication is disabled and login is not possible.

local: Use the local user database on the switch for authentication.

radius: Use remote RADIUS server(s) for authentication.

: Use remote server(s) for authentication.
Methods that involves remote servers are timed out if the remote servers are
offline.
In this case the next method is tried. Each method is tried from left to right and
continues until a method either approves or rejects a user. If a remote server is
used for primary authentication it is recommended to configure secondary
authentication as 'local'. This will enable the management client to login via the
local user database
if none of the configured authentication servers are alive.
3. Buttons
Save – Click to save changes.
Reset - Click to undo any changes made locally and revert to previously saved
values.
4.5.1.4. SSH
Configure SSH on this page.
Web Interface
To monitor an Security SSH in the web interface:
1. Click Configuration, Security and SSH