AirLive IGR-842PoE, User Manual, Page: 199 / 299

5. Web Management: Monitor of IGR-842POE
AirLive IGR-842POE User Manual
194
Port to mirror also known as the mirror port . Frames from ports that have either
source (rx) or destination (tx) mirroring enabled are mirrored on this port.
Disabled disables mirroring.
Join-time is a value in the range 1-20 in the units of centi seconds, i.e. in units of
one hundredth of a second. The default is 20.
Leave-time is a value in the range 60-300 in the units of centi seconds, i.e. in
units of one hundredth of a second. The default is 60.
LeaveAll-time is a value in the range 1000-5000 in the units of centi seconds, i.e.
in units of one hundredth of a second. The default is 1000.
2. Max number of VLANs :
The logical port for the settings contained in the same row.
When GVRP is enabled a maximum number of VLANs supported by GVRP is
specified. By default this number is 20. This number can only be changed when
GVRP is turned off.
Button :
Save – Click to save changes.
4.21.2. Port config
Web Interface
To configure the Mirror in the web interface:
1. Click Configuration, GVRP, Port config.
Parameter description:
1. Button :
Save – Click to save changes.
4.22 sFlow
This page allows for configuring sFlow. The configuration is divided into two parts: