AirLive IGR-842PoE, User Manual, Page: 191 / 299

5. Web Management: Monitor of IGR-842POE
AirLive IGR-842POE User Manual
186
7. Remap DP1 :
Select the DSCP value from select menu to which you want to remap. DSCP
value ranges from 0 to 63.
Button :
Save – Click to save changes.
Reset – Click to undo any changes made locally and revert to previously saved
values.
4.19.9. DSCP-Classification
The section describes to teach user to configure and allows you to map DSCP value to a
QoS Class and DPL value. Others the settings relate to the currently selected stack unit, as
reflected by the page header.
Web Interface
To configure the DSCP Classification parameters in the web interface:
1. Click Configuration, QoS, DSCP Classification
2. Scroll to set the DSCP Parameters
3. Click the save to save the setting
4. If you want to cancel the setting then you need to click the Reset button.
It will revert to previously saved values