AirLive IGR-842PoE, User Manual, Page: 169 / 299

5. Web Management: Monitor of IGR-842POE
AirLive IGR-842POE User Manual
164
(EtherType) field value for the protocol running on top of SNAP; if the OUI is an
OUI for a particular organization, the protocol ID is a value assigned by that
organization to the protocol running on top of SNAP.
In other words, if value of OUI field is 00-00-00 then value of PID will be etype
(0x0600-0xffff) and if value of OUI is other than 00-00-00 then valid value of PID
will be any value from 0x0000 to 0xffff.
4. Group Name :
A valid Group Name is a unique 16-character long string for every entry which
consists of a combination of alphabets (a-z or A-Z) and integers(0-9).
Note: special character and underscore(_) are not allowed.
Button :
Auto-Refresh –Check this box to refresh the page automatically. Automatic
refresh occurs every 3 seconds.
Refresh – Click to refresh the page immediately.
Add New Entry – Click to add a new entry in mapping table.
Save – Click to save changes.
Reset – Click to undo any changes made locally and revert to previously saved
values.
4.17.2.2.
Group to VLAN
This section allows you to map a already configured Group Name to a VLAN for the
selected stack switch unit switch .
Web Interface
To Display Group Name to VLAN mapping table configured in the web interface:
1. Click VCL, Group Name VLAN configuration and add new entry.
2. Specify the Group Name and VLAN ID.
3. Click Save.
Parameter description:
1. Delete :
To delete a Group Name to VLAN map entry, check this box. The entry will be
deleted on the switch during the next Save.
2. Group Name :
A valid Group Name is a string of at the most 16 characters which consists of a
combination of alphabets (a-z or A-Z) and integers(0-9), no special character is
allowed. whichever Group name you try map to a VLAN must be present in