AirLive IGR-842PoE, User Manual, Page: 155 / 299

5. Web Management: Monitor of IGR-842POE
AirLive IGR-842POE User Manual
150
1. Day :
In this mode the user allocates the amount of power that each port may reserve.
The allocated/reserved power for each port/PD is specified in the Maximum Power
fields.
2. Interval :
Start - Select the start hour and minute.
End - Select the end hour and minute.
3. Action
Power On - Select the radio button to apply power on during the interval.
Power Off - Select the radio button to apply power off during the interval.
Power Scheduling Interval Configuration
1. Time Interval :
There are 48 time interval one day. Each interval have 30 minutes.
2. Day :
The current scheduling state is displayed graphically during the week.
Green indicates the power is on and red that it is off.
Directly changes checkmarks to indicate which day are members of the time
interval.
Check or uncheck as needed to modify the scheduling table.
Buttons :
Apply – Click to apply the power scheduling interval.
Save – Click to save changes.
Reset – Click to undo any changes made locally and revert to previously saved
values.
4.13.3. Power Reset
This page provides power reset entry configurations.
The entry is used to control the power reset time on PoE port.
It is allowed to create at maximum 5 entries for each PoE port.
Web Interface
To configure Power Reset in the web interface:
1. Click configuration, PoE, and Power Reset