AirLive IGR-842PoE, User Manual, Page: 231 / 299

5. Web Management: Monitor of IGR-842POE
AirLive IGR-842POE User Manual
226
Attached MAC Addresses
1. Identity:
Shows the identity of the supplicant, as received in the Response Identity EAPOL
frame. Clicking the link causes the supplicant's EAPOL and Backend Server
counters to be shown in the Selected Counters table. If no supplicants are
attached, it shows No supplicants attached. This column is not available for
MAC-based Auth.
2. MAC Address:
For Multi 802.1X, this column holds the MAC address of the attached supplicant.
For MAC-based Auth., this column holds the MAC address of the attached client.
Clicking the link causes the client's Backend Server counters to be shown in the
Selected Counters table. If no clients are attached, it shows No clients attached.
3. VLAN ID:
This column holds the VLAN ID that the corresponding client is currently secured
through the Port Security module.
4. State:
The client can either be authenticated or unauthenticated. In the authenticated
state, it is allowed to forward frames on the port, and in the unauthenticated state,
it is blocked. As long as the backend server hasn't successfully authenticated the
client, it is unauthenticated. If an authentication fails for one or the other reason,
the client will remain in the unauthenticated state for Hold Time seconds.
5. Last Authentication:
Shows the date and time of the last authentication of the client (successful as well
as unsuccessful).
Button :
Auto-Refresh – Check this box to refresh the page automatically. Automatic
refresh occurs every 3 seconds.
Refresh – Click to refresh the page immediately.
Clear – This button is available in the following modes:
• Force Authorized
• Force Unauthorized
• Port-based 802.1X
• Single 802.1X Click to clear the counters for the selected port.
Clear All – This button is available in the following modes:
• Multi 802.1X
• MAC-based Auth.X
Click to clear both the port counters and all of the attached client's counters. The
"Last Client" will not be cleared, however.
Clear This – This button is available in the following modes:
• Multi 802.1X
• MAC-based Auth.X
Click to clear only the currently selected client's counters