AirLive IGR-842PoE, User Manual, Page: 178 / 299

5. Web Management: Monitor of IGR-842POE
173
AirLive IGR-842POE User Manual
Parameter description:
1. Port :
The port number for which the configuration below applies.
2. Enabled :
Controls whether the policer is enabled on this switch port.
3. Rate :
Controls the rate for the policer. The default value is 500. This value is restricted
to 100-1000000 when the "Unit" is "kbps" or "fps", and it is restricted to 1-3300
when the "Unit" is "Mbps" or "kfps".
4. Unit :
Controls the unit of measure for the policer rate as kbps, Mbps, fps or kfps . The
default value is "kbps".
5. Flow Control :
If flow control is enabled and the port is in flow control mode, then pause frames
are
sent instead of discarding frames.
Button :
Save – Click to save changes.
Reset – Click to undo any changes made locally and revert to previously saved
values.
4.19.3. Port Scheduler
This section provides an overview of QoS Egress Port Schedulers for all switch ports. and
the ports belong to the currently selected stack unit, as reflected by the page header.