AirLive IGR-842PoE, User Manual, Page: 121 / 299

5. Web Management: Monitor of IGR-842POE
AirLive IGR-842POE User Manual
116
Parameter description:
1. MSTI :
The bridge instance. The CIST is the default instance, which is always active.
2. Priority :
Controls the bridge priority. Lower numeric values have better priority. The bridge
priority plus the MSTI instance number, concatenated with the 6-byte MAC
address of the switch forms a
Bridge Identifier .
Buttons
Save – Click to save changes.
Reset - Click to undo any changes made locally and revert to previously saved
values.
4.8.4. CIST Ports
When you implement an Spanning Tree protocol on the switch that the bridge instance. You
need to configure the CIST Ports. The section describes it allows the user to inspect the to
inspect the current STP CIST port configurations, and possibly change them as well.
Web Interface
To configure the Spanning Tree CIST Ports parameters in the web interface:
1. Click Configuration, Spanning Tree, CIST Ports
2. Scroll and evoke to set all parameters of CIST Aggregated Port Configuration.
3. Evoke to enable or disable the STP, then scoll and evoke to set all parameters of
the CIST normal Port configuration.
4. Click the apply to save the setting.
5. If you want to cancel the setting then you need to click the Reset button. It will
revert to previously saved values.