AirLive IGR-842PoE, User Manual, Page: 145 / 299

5. Web Management: Monitor of IGR-842POE
AirLive IGR-842POE User Manual
140
determine their characteristics (manufacturer, software and hardware versions, serial or
asset number).
This page allows you to configure the LLDP-MED. This function applies to VoIP devices
which support LLDP-MED.
Web Interface
To configure the LLDP-MED in the web interface:
1. Click Configuration, LLDP-MED.
2. Modify Fast start repeat count parameter, default is 4
3. Modify Coordinates Location parameters
4. Fill Civic Address Location parameters
5. Add new policy
6. Click Apply, will show following Policy Port Configuration
7. Select Policy ID for each port
8. Click Apply
Parameter description:
Fast start repeat count
1. Fast start repeat count :
Rapid startup and Emergency Call Service Location Identification Discovery of
endpoints is a critically important aspect of VoIP systems in general. In addition, it
is best to advertise only those pieces of information which are specifically relevant
to particular endpoint types (for example only advertise the voice network policy to