manualshive.com logo in svg

AirLive IGR-842PoE, User Manual, Page: 223 / 299

Share
Download
AirLive IGR-842PoE User Manual Download Page 223

5. 

Web Management: Monitor of IGR-842POE

 

 
 
 

 

AirLive IGR-842POE User Manual 

218 

5.  Replace Agent Option:   

The number of packets which were replaced with relay agent information option.

 

6.  Keep Agent Option:   

The number of packets whose relay agent information was retained.

 

7.  Drop Anget Option:   

The number of packets that were dropped which were received with relay agent

 

information.

 

Button : 

Auto-Refresh

  –  Check this box to refresh the page automatically. Automatic 

refresh occurs every 3 seconds.

 

Refresh

 – Click to refresh the page immediately.. 

Clear

 – Flushes all dynamic entries. 

 
5.4.4. Detailed Statistics 

This page provides statistics for 

DHCP snooping

. Notice that the normal forward per-port 

TX statistics isn't increased if the incoming DHCP packet is done by L3 forwarding 
mechanism. And clear the statistics on specific port may not take effect on global statistics 
since it gathers the different layer overview. 

 

Web interface   

To configure Detailed Statistics in the web interface: 

1.  Click Monitor, DHCP, DHCP Detailed Statistics. 

 

Parameter description: 

1.  Rx and Tx Discover:   

The number of discover (option 53 with value 1) packets received and transmitted. 

2.  Rx and Tx Offer:   

The number of offer (option 53 with value 2) packets received and transmitted. 

3.  Rx and Tx Request:   

The number of request (option 53 with value 3) packets received and transmitted.

 

4.  Rx and Tx Delcine:   

The number of decline (option 53 with value 4) packets received and transmitted. 

5.  Rx and Tx ACK:   

The number of ACK (option 53 with value 5) packets received and transmitted. 

6.  Rx and Tx NAK:   

The number of NAK (option 53 with value 6) packets received and transmitted. 

Summary of Contents for IGR-842PoE












































































































































































































































































































Reviews:

No comments