AirLive IGR-842PoE, User Manual, Page: 226 / 299

5. Web Management: Monitor of IGR-842POE
221
AirLive IGR-842POE User Manual
Parameter description:
User Module Legend
1. User Module Name:
The interface type through which the remote host can access the switch.
2. Abbr:
Number of received packets from the interface when access management mode is
enabled.
Port Status
1. Port:
The port number for which the status applies. Click the port number to see the
status for this particular port.
2. User:
Each of the user modules has a column that shows whether that module has
enabled Port Security or not. A '-' means that the corresponding user module is
not enabled, whereas a letter indicates that the user module abbreviated by that
letter (see Abbr) has enabled port security..
3. Status:
Shows the current state of the port. It can take one of four values:
Disabled: No user modules are currently using the Port Security service.
Ready: The Port Security service is in use by at least one user module, and is
awaiting frames from unknown MAC addresses to arrive.
Limit Reached : The Port Security service is enabled by at least the Limit Control
user module, and that module has indicated that the limit is reached and no more
MAC addresses should be taken in.
Shutdown: The Port Security service is enabled by at least the Limit Control user
module, and that module has indicated that the limit is exceeded. No MAC
addresses can be learned on the port until it is administratively re-opened on the
Limit Control configuration Web-page
4. MAC Count(Current, Limit):
The two columns indicate the number of currently learned MAC addresses
(forwarding as well as blocked) and the maximum number of MAC addresses that