AirLive IGR-842PoE, User Manual, Page: 88 / 299

5. Web Management: Monitor of IGR-842POE
83
AirLive IGR-842POE User Manual
Parameter description:
1. Ingress Port :
Indicates the ingress port of the ACE. Possible values are:
All : The ACE will match all ingress port.
Port : The ACE will match a specific ingress port.
2. Policy/Bitmask :
Indicates the policy number and bitmask of the ACE.
3. Frame Type :
Indicates the frame type of the ACE. Possible values are:
Any : The ACE will match any frame type.
EType : The ACE will match Ethernet Type frames. Note that an Ethernet Type
based ACE will not get matched by IP and ARP frames.
ARP : The ACE will match ARP/RARP frames.
IPv4 : The ACE will match all IPv4 frames.
IPv4/ ICMP : The ACE will match IPv4 frames with ICMP protocol.
IPv4/ UDP : The ACE will match IPv4 frames with UDP protocol.
IPv4/ TCP : The ACE will match IPv4 frames with TCP protocol.
IPv4/Other : The ACE will match IPv4 frames, which are not ICMP/UDP/TCP.
IPv6 : The ACE will match all IPv6 standard frames.
4. Action :
Indicates the forwarding action of the ACE.
Permit : Frames matching the ACE may be forwarded and learned.
Deny : Frames matching the ACE are dropped.
Filter : Frames matching the ACE are filtered.
5. Rate Limiter :
Indicates the rate limiter number of the ACE. The allowed range is 1 to 16 . When
Disabled is displayed, the rate limiter operation is disabled.
6. Port Redirect :
Indicates the port redirect operation of the ACE. Frames matching the ACE are
redirected to the port number. The allowed values are
Disabled or a specific port
number. When Disabled is displayed, the port redirect operation is disabled.
7. Mirror :
Specify the mirror operation of this port. Frames matching the ACE are mirrored to
the destination mirror port. The allowed values are:
Enabled : Frames received on the port are mirrored.
Disabled : Frames received on the port are not mirrored.
The default value is "Disabled".
8. Counter :
The counter indicates the number of times the ACE was hit by a frame.