AirLive IGR-842PoE, User Manual, Page: 31 / 299

5. Web Management: Monitor of IGR-842POE
AirLive IGR-842POE User Manual
26
UDP communication and received on UDP port 514 and the syslog server will not
send acknowledgments back sender since UDP is a connectionless protocol and it
does not provide acknowledgments. The syslog packet will always send out even
if the syslog server does not exist. Possible modes are:
Enabled : Enable server mode operation.
Disabled : Disable server mode operation.
2. Acronym :
Indicates the IPv4 host address of syslog server. If the switch provide DNS feature,
it also can be a host name.
3. Syslog Level :
Indicates what kind of message will send to syslog server. Possible modes are:
Info : Send informations, warnings and errors.
Warning : Send warnings and errors.
Error : Send errors.
4. Buttons
Save – Click to save changes.
Reset - Click to undo any changes made locally and revert to previously saved
values.
4.1.6. System Alarm Profile
Alarm Profile is provided here to enable/disable alarm
Web Interface
To configure Alarm Profile in the web interface:
1. Click Configuration, Alarm Profile
2. Enable the Alarm.
3. Click Save