AirLive IGR-842PoE, User Manual, Page: 71 / 299

5. Web Management: Monitor of IGR-842POE
AirLive IGR-842POE User Manual
66
4.5.2. Network
4.5.2.1. Limit Control
This page allows you to configure the Port Security Limit Control system and port settings.
Limit Control allows for limiting the number of users on a given port. A user is identified by a
MAC
address and VLAN ID. If Limit Control is enabled on a port, the
limit specifies the maximum
number of
users on the port. If this number is exceeded, an
action is taken. The action can be one of
the four
different actions as described below.
The Limit Control module utilizes a lower-layer module, Port Security module, which
manages MAC
addresses learnt on the port.
The Limit Control configuration consists of two sections, a system- and a port-wide.
Web Interface
To configure a Configuration of Limit Control in the web interface:
1. Select “Enabled” in the Mode of System Configuration.
2. Checked Aging Enabled
3. Set Aging Period(Default is 3600 seconds)
To configure a Port Configuration of Limit Control in the web interface:
1. Select “Enabled” in the Mode of Port Configuration
2. Specify the maximum number of MAC addresses in the Limit of Port
Configuration.
3. Set Action (None,Trap, Shutdown, Trap & Shutdown)
4. Click Apply