AirLive IGR-842PoE, User Manual, Page: 36 / 299

5. Web Management: Monitor of IGR-842POE
31
AirLive IGR-842POE User Manual
Parameter description:
1. Port :
This is the logical port number for this row.
2. Link :
The current link state is displayed graphically. Green indicates the link is up and
red that it is down.
3. Current Link Speed :
Provides the current link speed of the port.
4. Configuration Speed :
Selects any available link speed for the given switch port. Only speeds supported
by the specific port is shown. Possible speeds are:
Disabled
- Disables the switch port operation.
Auto - Port auto negotiating speed with the link partner and selects the highest
speed that is compatible with the link partner.
10Mbps HDX - Forces the cu port in 10Mbps half duplex mode.
10Mbps FDX - Forces the cu port in 10Mbps full duplex mode.
100Mbps HDX - Forces the cu port in 100Mbps half duplex mode.
100Mbps FDX - Forces the cu port in 100Mbps full duplex mode.
1Gbps FDX - Forces the port in 1Gbps full duplex .
5. Flow Control :
When Auto Speed is selected on a port, this section indicates the flow control
capability that is advertised to the link partner.
When a fixed-speed setting is selected, that is what is used. The Current Rx
column indicates whether pause frames on the port are obeyed, and the Current
Tx column indicates whether pause frames on the port are transmitted. The Rx
and Tx settings are determined by the result of the last
Auto-Negotiation .