AirLive IGR-842PoE, User Manual, Page: 134 / 299

5. Web Management: Monitor of IGR-842POE
129
AirLive IGR-842POE User Manual
The allowed selection is IGMP-Auto , Forced IGMPv1 , Forced IGMPv2 , Forced
IGMPv3 , default compatibility value is IGMP-Auto.
7. PRI :
Priority of Interface.
It indicates the IGMP control frame priority level generated by the system. These
values can be used to prioritize different classes of traffic.
The allowed range is
0 (best effort) to 7 (highest), default interface priority value is
0.
8. RV :
Robustness Variable.
The Robustness Variable allows tuning for the expected packet loss on a network.
The allowed range is
1 to 255 , default robustness variable value is 2.
9. QI :
Query Interval.
The Query Interval is the interval between General Queries sent by the Querier.
The allowed range is
1 to 31744 seconds, default query interval is 125 seconds.
10. QRI :
Query Response Interval.
The Maximum Response Delay used to calculate the Maximum Response Code
inserted into the periodic General Queries.
The allowed range is
0 to 31744 in tenths of seconds, default query response
interval is 100 in tenths of seconds (10 seconds).
11. LLQI(LMQI for IGMP) :
Last Member Query Interval.
The Last Member Query Time is the time value represented by the Last Member
Query Interval, multiplied by the Last Member Query Count.
The allowed range is
0 to 31744 in tenths of seconds, default last member query
interval is 10 in tenths of seconds (1 second).
12. URI :
Unsolicited Report Interval. The Unsolicited Report Interval is the time between
repetitions of a host's initial report of membership in a group.
The allowed range is
0 to 31744 seconds, default unsolicited report interval is 1
second.
Buttons :
Refresh – Refreshes the displayed table starting from the "VLAN" input fields.
|<< – Updates the table starting from the first entry in the VLAN Table, i.e. the
entry with the lowest VLAN ID.
>> – Updates the table, starting with the entry after the last entry currently
displayed.
Add New IGMP VLAN – Click to add new IGMP VLAN. Specify the VID and
configure the new entry. Click "Save". The specific IGMP VLAN starts working