manualshive.com logo in svg

AirLive IGR-842PoE, User Manual, Page: 218 / 299

Share
Download
AirLive IGR-842PoE User Manual Download Page 218

5. 

Web Management: Monitor of IGR-842POE

 

 

213 

AirLive  IGR-842POE  User  Manual 

 

Parameter description: 

Database Counters 

1.  Pool:   

Number of pools. 

2.  Excluded IP Address:   

 

Number of excluded IP address ranges. 

3.  Declined IP Address:   

Number of declined IP addresses.

 

Binding Counters 

1.  Automatic Binding:   

Number of bindings with network-type pools. 

2.  Manual Binding:   

Number of bindings that administrator assigns an IP address to a client. That is, 
the pool is of host type. 

3.  Expired Binding:   

Number of bindings that their lease time expired or they are cleared from 
Automatic/Manual type bindings. 

DHCP Message Received Counters 

1.  DISCOVER:   

Number of DHCP DISCOVER messages received. 

Summary of Contents for IGR-842PoE












































































































































































































































































































Reviews:

No comments