Page
9
of
92
2.2 Front Console LED
Display
Indicator Light
Torque Display (Always displays torque value)
Secondary Display
Parameter Setting (PSet)/Job display and
Increment/Decrement buttons
Toggle button
Indicator Lights:
Green LED:
Indicates fastening cycle meets specified
Parameters.
Red LED:
Indicates fastening cycle rejected for
exceeding high torque.
Red Flashing LED:
Indicates low torque. Fastening cycle was
rejected for not achieving low torque.
Yellow LED:
Indicates
High Pulse. Fastening cycle was rejected
for exceeding high pulse.
Yellow Flashing LED:
Indicates Low Pulse. Fastening cycle was
rejected for not achieving low pulse.
Blue LED:
Tool is In-cycle, above threshold.
•
Increment/Decrement buttons change Pset.
•
Toggle button switches
secondary display
between
o
Units of measure
o
Ethernet 1 IP address
o
Ethernet 2 IP address
o
USB (System Port) IP address
o
Angle report
NOTE:
If Jobs are enabled refer to
Job
section of the manual for Toggle Button
function.
