Page
41
of
92
4.5.7 Bar Code Setup
•
Required Identifiers for Tool Enable:
Selects which
four Identifiers (ID#1-4) are required to enable tool
•
Reset identifiers for Job Complete:
Selects which
four Identifiers (ID#1-4) to reset on a job complete.
Select Identifiers by clicking on them
Step 1
:
Click anywhere in body to enter the Barcode ID
configuration Screen or add additional Identifiers
Step 2:
Enter appropriate information on Barcode ID Configuration Screen
Identifier Mask:
The Mask is a string used to compare
the received barcode against. The received barcode
must be at least as long in length as the Mask. The
Mask can also contain “don’t care” characters of a
decimal point or period in the string. These characters
are counted in the length, however, the actual
received character in that position doesn’t matter.
Example:
VIN#123456
Identifier Type:
Identifies which identifier (ID#1-4)
received barcode will be stored into.
Identifier Description:
Text field can be used to give a
description to each identifier type. (Example: Vehicle).
Action:
Action executed by controller when barcode
with a matching identifier mask is scanned.
The actions are:
•
Select Job## (This will require a Job to be
configured on the JOB page when using this option)
•
Do Nothing
