Page
56
of
92
Action
Action can be one of the following:
•
None
•
Select PS#1-256
•
Select Job#1-20
Reset ID
The “Reset ID” has the ability to reset other identifiers (ID#1
-4) when barcode is received
.
Examples:
Operator Scans
When a vehicle enters the station, the operator scans the VIN. The controller selects the correct
job number and enables the tool. Each fastener will be identified with this VIN stored locally,
and/or, sent to a server for storage. The job settings will disable the tool when the job is
complete.
Setup
In this example, there are three possible vehicle types each with its own job. The barcode scan
will select the correct job (enabling the tool) and the scan will be stored into ID#1.
Mask
ID type
Action
Reset ID
ID#1
ID#
2
ID#
3
ID#4
“VIN…..7…”
ID#1
Select
Job#
1 No
No
No
No
“VIN…..8…”
ID#1
Select
Job#
2 No
No
No
No
“VIN…..9…”
ID#1
Select
Job#
3 No
No
No
No
The tool enable/disable will be controlled by the job settings; the correct job will be selected by
the barcode scan. The
“ID Required to Enable the Tool” feature
does not need to be utilized
.
Required Identifiers for Tool Enable
ID#1
ID#2
ID#3
ID#4
No
No
No
No
These settings are irrelevant since the only way to enable the tool is with a new job and the only
way to select a new job is to scan a new barcode.
Reset Identifiers on Job Complete
ID#1
ID#2
ID#3
ID#4
Yes
No
No
No
