Page
46
of
92
4.6.4
Tool Communications update image
Access this screen to view the communications between
the tool and controller. Data should be continually
streaming if the system is working normally. This can be
used to identify issues with tool communication. If no data
is being sent between the tool and controller then there
may be a hardware problem. These logs can be saved for
troubleshooting purposes.
4.6.5 Identify Controller
‘
Identify Controller
’
will cause lights on controller and tool to flash making the system easy to
locate. This is especially helpful when programming is being done and multiple controllers are
being used near each other.
4.6.6 Record Logs
Logs information describing usage of controller and tools that have been used with that
controller.
4.6.6.1 Change Log
Log displays changes made to tool or
controller.
4.6.6.2 Information Log
Log displays all information entries.
4.6.6.3 Error Log
Log displays ONLY Error Entries.
4.6.6.4 All
Displays all Changes, Information and Error entries.
