Page
52
of
92
4.9.6 Backup Restore
The Backup function allows the user to create an image of the controller software/firmware
including all Configurations, Operations, I/O, and Spindle settings. This is used to create a point in
which the controller can restore to if the need arises. In that case, the Restore function would be
used.
1.
From the Home screen, navigate to Advanced
→
Backup Restore
2.
Press
Backup
to initialize the backup process
3.
Press
to replace previous backup with current system, the backup process will begin
4.
Press
Restore
to initialize the restore process
5.
Press
to restore all settings and firmware to last backup, the restore process will begin
6.
The controller will restart when finished
4.9.7 Restore Factory Defaults
This allows
the user to reset the controller’s parameters to factory settings
1.
From the Home screen, navigate to Advanced
→
Restore Factory Defaults.
2.
Select the settings to be changed and accept
