Agilent Technologies InfiniiVision 2000 X-Series, Programmer'S Manual, Page: 912 / 930

912 Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide
38
Programming Examples
Console.WriteLine("Waveform X increment: {0:e}", dblXincrement)
Console.WriteLine("Waveform X origin: {0:e}", dblXorigin)
Console.WriteLine("Waveform X reference: {0:e}", nXreference)
Console.WriteLine("Waveform Y increment: {0:e}", dblYincrement)
Console.WriteLine("Waveform Y origin: {0:e}", dblYorigin)
Console.WriteLine("Waveform Y reference: {0:e}", nYreference)
' Read waveform data.
myScope.SCPI.WAVeform.DATA.QueryBYTE(byteResultsArray)
nLength = byteResultsArray.Length
Console.WriteLine("Number of data values: {0}", nLength)
' Set up output file:
strPath = "c:\scope\data\waveform_data.csv"
If File.Exists(strPath) Then
File.Delete(strPath)
End If
' Open file for output.
Dim writer As StreamWriter = File.CreateText(strPath)
' Output waveform data in CSV format.
For i As Integer = 0 To nLength - 2
writer.WriteLine("{0:f9}, {1:f6}", _
dblX (CSng(i) * dblXincrement), _
((CSng(byteResultsArray(i)) - nYreference) * _
dblYincrement) + dblYorigin)
Next
' Close output file.
writer.Close()
Console.WriteLine("Waveform format BYTE data written to {0}", _
strPath)
End Sub
End Class
End Namespace
SCPI.NET Example in IronPython
You can also control Agilent oscilloscopes using the SCPI.NET library and
Python programming language on the .NET platform using:
• IronPython ( "http://ironpython.codeplex.com/" ) which is an
implementation of the Python programming language running under
.NET.
To run this example with IronPython:
1
Install the Agilent Command Expert software and the command set for
the oscilloscope.
2 Cut- and- paste the code that follows into a file named "example.py".
3 Edit the program to use the address of your oscilloscope.