Agilent Technologies InfiniiVision 2000 X-Series, Programmer'S Manual, Page: 372 / 930

372 Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide
20
:MEASure Commands
:MEASure:VPP
(see page 790 )
Command Syntax
:MEASure:VPP [<source>]
<source> ::= {CHANnel<n> | FUNCtion | MATH | WMEMory<r>}
<n> ::= 1 to (# analog channels) in NR1 format
<r> ::= 1-2 in NR1 format
The :MEASure:VPP command installs a screen measurement and starts a
vertical peak- to- peak measurement. If the optional source parameter is
specified, the current source is modified.
Query Syntax
:MEASure:VPP? [<source>]
The :MEASure:VPP? query measures the maximum and minimum vertical
value for the selected source, then calculates the vertical peak- to- peak
value and returns that value. The peak- to- peak value (Vpp) is calculated
with the following formula:
Vpp = Vmax - Vmin
Vmax and Vmin are the vertical maximum and minimum values present on
the selected source.
Return Format
<value><NL>
<value> ::= vertical peak to peak value in NR3 format
See Also
• "Introduction to :MEASure Commands" on page 340
• ":MEASure:SOURce" on page 361
• ":MEASure:VMAX" on page 370
• ":MEASure:VMIN" on page 371
• ":MEASure:VAMPlitude" on page 367