Agilent Technologies InfiniiVision 2000 X-Series, Programmer'S Manual, Page: 597 / 930

:TRIGger Commands
29
Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide 597
:TRIGger:LEVel:LOW
(see page 790 )
Command Syntax
:TRIGger:LEVel:LOW <level>, <source>
<level> ::= 0.75 x full-scale voltage from center screen in NR3 format
for internal triggers
<source> ::= CHANnel<n>
<n> ::= 1 to (# analog channels) in NR1 format
The :TRIGger:LEVel:LOW command sets the low trigger voltage level voltage
for the specified source.
Query Syntax
:TRIGger:LEVel:LOW? <source>
The :TRIGger:LEVel:LOW? query returns the low trigger voltage level for
the specified source.
Return Format
<level><NL>
See Also
• "Introduction to :TRIGger Commands" on page 589
• ":TRIGger:LEVel:HIGH" on page 596
• ":TRIGger[:EDGE]:SOURce" on page 606