
672
Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide
31
:WGEN Commands
:WGEN:MODulation:AM:DEPTh
(see
page 790
)
Command Syntax
:WGEN:MODulation:AM:DEPTh <percent>
<percent> ::= AM depth percentage from 0% to 100% in NR1 format
The :WGEN:MODulation:AM:DEPTh command specifies the amount of
amplitude modulation.
AM Depth refers to the portion of the amplitude range that will be used
by the modulation. For example, a depth setting of 80% causes the output
amplitude to vary from 10% to 90% (90% – 10% = 80%) of the original
amplitude as the modulating signal goes from its minimum to maximum
amplitude.
Query Syntax
:WGEN:MODulation:AM:DEPTh?
The :WGEN:MODulation:AM:DEPTh? query returns the AM depth
percentage setting.
Return Format
<percent><NL>
<percent> ::= AM depth percentage from 0% to 100% in NR1 format
See Also
•
":WGEN:MODulation:AM:FREQuency"
on page 673
•
":WGEN:MODulation:FM:DEViation"
on page 674
•
":WGEN:MODulation:FM:FREQuency"
on page 675
•
":WGEN:MODulation:FSKey:FREQuency"
on page 676
•
":WGEN:MODulation:FSKey:RATE"
on page 677
•
":WGEN:MODulation:FUNCtion"
on page 678
•
":WGEN:MODulation:FUNCtion:RAMP:SYMMetry"
on page 679
•
":WGEN:MODulation:STATe"
on page 681
•
":WGEN:MODulation:TYPE"
on page 682
Summary of Contents for InfiniiVision 2000 X-Series
