Agilent Technologies InfiniiVision 2000 X-Series, Programmer'S Manual, Page: 635 / 930

:WAVeform Commands
30
Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide 635
:WAVeform:BYTeorder
(see page 790 )
Command Syntax
:WAVeform:BYTeorder <value>
<value> ::= {LSBFirst | MSBFirst}
The :WAVeform:BYTeorder command sets the output sequence of the WORD
data.
• MSBFirst — sets the most significant byte to be transmitted first.
• LSBFirst — sets the least significant byte to be transmitted first.
This command affects the transmitting sequence only when
:WAVeform:FORMat WORD is selected.
The default setting is MSBFirst.
Query Syntax
:WAVeform:BYTeorder?
The :WAVeform:BYTeorder query returns the current output sequence.
Return Format
<value><NL>
<value> ::= {LSBF | MSBF}
See Also
• "Introduction to :WAVeform Commands" on page 629
• ":WAVeform:DATA" on page 637
• ":WAVeform:FORMat" on page 639
• ":WAVeform:PREamble" on page 644
Example Code • "Example Code" on page 650
• "Example Code" on page 645