Agilent Technologies InfiniiVision 2000 X-Series, Programmer'S Manual, Page: 525 / 930

:SBUS<n> Commands
25
Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide 525
:SBUS<n>:UART:TRIGger:BURSt
(see page 790 )
Command Syntax
:SBUS<n>:UART:TRIGger:BURSt <value>
<value> ::= {OFF | 1 to 4096 in NR1 format}
The :SBUS<n>:UART:TRIGger:BURSt command selects the burst value (Nth
frame after idle period) in the range 1 to 4096 or OFF, for the trigger
when in UART mode.
Query Syntax
:SBUS<n>:UART:TRIGger:BURSt?
The :SBUS<n>:UART:TRIGger:BURSt? query returns the current UART
trigger burst value.
Return Format
<value><NL>
<value> ::= {OFF | 1 to 4096 in NR1 format}
See Also • "Introduction to :TRIGger Commands" on page 589
• ":TRIGger:MODE" on page 598
• ":SBUS<n>:UART:TRIGger:IDLE" on page 527
• ":SBUS<n>:UART:TRIGger:TYPE" on page 529