Agilent Technologies InfiniiVision 2000 X-Series, Programmer'S Manual, Page: 234 / 930

234 Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide
10
:CHANnel<n> Commands
:CHANnel<n>:SCALe
(see page 790 )
Command Syntax
:CHANnel<n>:SCALe <scale>[<suffix>]
<scale> ::= vertical units per division in NR3 format
<suffix> ::= {V | mV}
<n> ::= 1 to (# analog channels) in NR1 format
The :CHANnel<n>:SCALe command sets the vertical scale, or units per
division, of the selected channel.
If the probe attenuation is changed, the scale value is multiplied by the
probe's attenuation factor.
Query Syntax
:CHANnel<n>:SCALe?
The :CHANnel<n>:SCALe? query returns the current scale setting for the
specified channel.
Return Format
<scale value><NL>
<scale value> ::= vertical units per division in NR3 format
See Also
• "Introduction to :CHANnel<n> Commands" on page 218
• ":CHANnel<n>:RANGe" on page 233
• ":CHANnel<n>:PROBe" on page 227