Agilent Technologies InfiniiVision 2000 X-Series, Programmer'S Manual, Page: 475 / 930

:SBUS<n> Commands
25
Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide 475
:SBUS<n>:IIC:TRIGger:PATTern:DATa2
(see page 790 )
Command Syntax
:SBUS<n>:IIC:TRIGger:PATTern:DATa2 <value>
<value> ::= integer or <string>
<string> ::= "0xnn" where n ::= {0,..,9 | A,..,F}
The :SBUS<n>:IIC:TRIGger:PATTern:DATa2 command sets IIC data 2. The
data value can range from 0x00 to 0x0FF (hexadecimal). Use the don't
care data pattern (- 1 or 0xFFFFFFFF) to ignore the data value.
Query Syntax
:SBUS<n>:IIC:TRIGger:PATTern:DATa2?
The :SBUS<n>:IIC:TRIGger:PATTern:DATa2? query returns the current
pattern for IIC data 2.
Return Format
<value><NL>
See Also • "Introduction to :TRIGger Commands" on page 589
• ":SBUS<n>:IIC:TRIGger:PATTern:ADDRess" on page 473
• ":SBUS<n>:IIC:TRIGger:PATTern:DATA" on page 474
• ":SBUS<n>:IIC:TRIGger[:TYPE]" on page 477