Agilent Technologies InfiniiVision 2000 X-Series, Programmer'S Manual, Page: 451 / 930

:SBUS<n> Commands
25
Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide 451
:SBUS<n>:MODE
(see page 790 )
Command Syntax
:SBUS<n>:MODE <mode>
<mode> ::= {CAN | IIC | LIN | SPI | UART}
The :SBUS<n>:MODE command determines the decode mode for the serial
bus.
Query Syntax
:SBUS<n>:MODE?
The :SBUS<n>:MODE? query returns the current serial bus decode mode
setting.
Return Format
<mode><NL>
<mode> ::= {CAN | IIC | LIN | SPI | UART | NONE}
Errors
• "- 241, Hardware missing" on page 753
See Also • "Introduction to :SBUS<n> Commands" on page 447
• ":SBUS<n>:CAN Commands" on page 452
• ":SBUS<n>:IIC Commands" on page 469
• ":SBUS<n>:LIN Commands" on page 479
• ":SBUS<n>:SPI Commands" on page 493
• ":SBUS<n>:UART Commands" on page 509
N O T E
This command is only valid when a serial decode option has been licensed.