
Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide
3
In This Book
This book is your guide to programming the 2000 X- Series oscilloscopes:
The first few chapters describe how to set up and get started:
•
Chapter 1
, “What's New,” starting on page 25, describes programming
command changes in the latest version of oscilloscope software.
•
Chapter 2
, “Setting Up,” starting on page 39, describes the steps you
must take before you can program the oscilloscope.
•
Chapter 3
, “Getting Started,” starting on page 49, gives a general
overview of oscilloscope program structure and shows how to program
the oscilloscope using a few simple examples.
•
Chapter 4
, “Commands Quick Reference,” starting on page 63, is a brief
listing of the 2000 X- Series oscilloscope commands and syntax.
The next chapters provide reference information on common commands,
root level commands, other subsystem commands, and error messages:
•
Chapter 5
, “Common (*) Commands,” starting on page 121, describes
commands defined by the IEEE 488.2 standard that are common to all
instruments.
•
Chapter 6
, “Root (:) Commands,” starting on page 147, describes
commands that reside at the root level of the command tree and control
many of the basic functions of the oscilloscope.
•
Chapter 7
, “:ACQuire Commands,” starting on page 183, describes
commands for setting the parameters used when acquiring and storing
data.
•
Chapter 8
, “:BUS<n> Commands,” starting on page 197, describes
commands that control all oscilloscope functions associated with the
digital channels bus display.
•
Chapter 9
, “:CALibrate Commands,” starting on page 207, describes
utility commands for determining the state of the calibration factor
protection button.
Table 1
InfiniiVision 2000 X-Series Oscilloscope Models
Channels
Input Bandwidth
70 MHz
100 MHz
200 MHz
4 8 digital
(mixed signal)
MSO-X 2004A
MSO-X 2014A
MSO-X 2024A
2 8 digital
(mixed signal)
MSO-X 2002A
MSO-X 2012A
MSO-X 2022A
4 analog
DSO-X 2004A
DSO-X 2014A
DSO-X 2024A
2 analog
DSO-X 2002A
DSO-X 2012A
DSO-X 2022A
Summary of Contents for InfiniiVision 2000 X-Series
