Agilent Technologies InfiniiVision 2000 X-Series, Programmer'S Manual, Page: 374 / 930

374 Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide
20
:MEASure Commands
:MEASure:VTIMe
(see page 790 )
Query Syntax
:MEASure:VTIMe? <vtime_argument>[,<source>]
<vtime_argument> ::= time from trigger in seconds
<source> ::= {<digital channels> | CHANnel<n> | FUNCtion | MATH
| WMEMory<r>}
<digital channels> ::= DIGital<d> for the MSO models
<n> ::= 1 to (# of analog channels) in NR1 format
<r> ::= 1-2 in NR1 format
<d> ::= 0 to (# digital channels - 1) in NR1 format
The :MEASure:VTIMe? query returns the value at a specified time on the
source specified with :MEASure:SOURce. The specified time must be on
the screen and is referenced to the trigger event. If the optional source
parameter is specified, the current source is modified.
Return Format
<value><NL>
<value> ::= value at the specified time in NR3 format
See Also • "Introduction to :MEASure Commands" on page 340
• ":MEASure:SOURce" on page 361
• ":MEASure:TEDGe" on page 363
• ":MEASure:TVALue" on page 365
N O T E
This query is not available if the source is FFT (Fast Fourier Transform).