4601 I-V Meter Operation Manual
6.6.3 Remote Command List
6-24
6.6.3
Remote Command List
1. The Default column shows default settings at Power ON or at factory shipment.
•
The Power ON column shows the status when the power is turned ON.
•
The *RST or RINI command initializes the settings to factory default.
•
However, the RINI command cannot initialize *5 and the RINI or *RST command cannot
initialize *6.
2. Note for description in the command list
•
Parameter enclosed in [ ] can be omitted.
•
Parameters enclosed in < > are single delimited data items.
•
The Operation column shows whether each command is acceptable or not in the Operate status
(OPR) and the Suspend status (SUS) in the DC source mode or the sweep source mode.
: Acceptable in any of the Operate, Suspend and Standby status.
: Acceptable in the HOLD status or Suspend status in the DC source mode.
Acceptable in the sweep stop status or Suspend status in the sweep source mode.
: Acceptable in the Suspend status.
:
Not acceptable in both the Operate status and Suspend status.
Every commands is always acceptable in the Standby status.
