4601 I-V Meter Operation Manual
4.2.14 STANDBY Key (Output OFF)
4-11
4.2.14
STANDBY Key (Output OFF)
Sets the voltage output status to Standby (output unit relay OFF).
4.2.15
SUSPEND Key (Output OFF)
Sets the voltage output status to Suspend.
Suspend status:
While the output unit relay is set to ON, the voltage source value is 0 V and the current limit is set to
the setting value or minimum value in the setting range.
4.2.16
SWEEP STOP Key (Sweep Stop)
Stops the sweep operation in the sweep source mode.
4.2.17
TRIGGER Key (Measurement Trigger and Sweep Start)
DC source mode:
When the sampling is set to AUTO, this key is ignored.
When the sampling is set to HOLD (the
HOLD
key goes ON), this key functions as measurement
trigger key.
Sweep source mode:
When the sampling is set to AUTO, this key functions as sweep start key.
When the sampling is set to HOLD (the
HOLD
key goes ON), this key functions as sweep step trig-
ger key.
4.2.18
UP Key (Voltage Source Range Up or Current Limit Range Up)
Raises the voltage source range or the current limit range by one.
4.2.19
UP Key (Measurement Range Up)
Raises the external voltage measurement range or the reference cell current range by one.
