4601 I-V Meter Operation Manual
1.3.1 Removing Panel
1-9
1.3.1
Removing Panel
Remove the panel from the front or rear output unit mounting section.
The removed screws will be reused to mount the output unit.
1.3.2
Mounting Output Unit
Unscrew the screws from the front or rear mounting section to remove the panel.
Unpack the output unit, and mount it on the front or rear mounting section.
Check that the connector is fit completely.
Then, fix the output unit with the removed screws.
Figure 1-5 Mounting Output Unit
NOTE:
Turn OFF the Power switch on the front panel of the 4601 before installing the output unit.