4601 I-V Meter Operation Manual
6.6.3 Remote Command List
6-26
Source
Operate/
standby
SBY
Sets the output to OFF (Standby).
OPR
Sets the output to ON (Operate).
SUS
Sets the output to Suspend (Suspend).
SBY?, OPR?, SUS?
Returns the current output status.
Source delay
TSD
[time]
Tds:
Source delay time setting
Unit: ms
(0.01 ms)
Setting range: 0.01 to 5999.8 ms
Resolution: 1/10/100
s
TSD?
Response:
TSDd.dddd
Measurement
delay
TMD
[time]
Td:
Measurement delay time setting Unit: ms
(0.02 ms)
Setting range: 0.02 to 5999.8 ms
Resolution: 1/10/100
s
TMD?
Response:
TMDd.dddd
Period
TPD
[time]
Tp:
Period setting
Unit: ms
(50 ms)
Setting range: 0.05 to 6000.0 ms
Resolution: 1/10/100
s
TPD?
Response:
TPDd.dddd
Hold time
THD
[time]
Th:
Hold time setting
Unit: ms
(0 ms)
Setting range: 0 to 6000.0 ms
Resolution: 100
s fixed
THD?
Response:
THDdddd.d
Trigger delay
TRD
[time]
Trigger delay setting
Unit: ms
(0 ms)
Setting range: 0 to 6000.0 ms
Resolution: 100
s fixed
TRD?
Response:
TRDdddd.d
Response
FL0
SLOW
FL1
MED
FL2
FAST
FL3
Extra FAST
FL?
Response:
FL0 to FL3
Sweep
Sweep range
SWR4
5 V range
SWR5
50 V range
SWR6
300 V range
SWR?
Response:
SWR4 to SWR6
Linear sweep
SLN
[
fd,
ld, step]
fd:
First value
(-1 mV)
ld:
Last value
(2 mV)
step:
Step count (1 to 1999)
(30)
If all the settings are omitted, set the sweep type only.
However it is not allowed to omit each value separately.
SLN?
Response:
SLN
<st>,
<sp>,<step>
st,sp: <d.ddddE
d> *1
step:<dddd>
*1:
The response decimal point is different depending on the set value.
For the source value, limit value, and time parameter set up range, refer to Chapter 9, "SPECIFICATIONS.".
Item
Command
Description
Default
Operation
During
calibration
Power
ON
Factory
shipment
DC
OPR/SUS
Sweep
OPR/SUS
Status
SBY?, OPR?, SUS?
Operate
OPR
Suspend
SUS
Standby
SBY
Response:
