4601 I-V Meter Operation Manual
4.2.11 MODE Key (Source Mode Selection)
4-10
J)
SYSTEM
Sets the system-related parameters.
1)
Display On/Off
Turns ON or OFF the screen.
On:
Turns ON the screen.
OFF in Remote:
Turns OFF the screen only in remote control.
Off:
Turns OFF the screen.
The
MODE
key blinks during screen OFF state.
Pressing the
MODE
key in this state cancels the screen
OFF setting.
2)
Brightness
Adjusts the screen brightness in three levels.
Level-3
3/3 brightness, highest level
Level-2
2/3 brightness, medium level
Level-1
1/3 brightness, lowest level
3)
Buzzer
Buzzes when each operation is complete.
On:
Turns ON the buzzer.
Off:
Turns OFF the buzzer.
4)
Error Queue
Reads out the data stored in the error logs.
For more information, refer to Section 5.8, "Error Log."
4.2.11
MODE Key (Source Mode Selection)
Switches between the DC source mode and the sweep source mode.
4.2.12
OPERATE Key (Output ON/OFF)
Sets the source value output to ON (Operate) or OFF (Standby).
The
OPERATE
key lights up during output ON (Operate) status.
4.2.13
SELECT Key (Numeric Item Selection)
Selects either item when there are two numeric items to be set such as current limit.
