4601 I-V Meter Operation Manual
4.2.10 MENU Key (Parameter Setting)
4-5
4.2.10
MENU Key (Parameter Setting)
Switches to the menu screen to set the parameter groups (categories).
Goes ON during menu screen display.
For information on how to set the parameters using the menu, refer to Section 3.4, "Menu Operation."
A)
SOURCE
Sets the source-related parameters.
1)
Suspend Z
Sets the output impedance in the Suspend status.
High Impedance
Sets the output impedance in the Suspend status to high
impedance. (Sets the output voltage to 0 V and the current
limit to the minimum value =
30 digits in the setting
current limit range.)
Low Impedance
Sets the output impedance in the Suspend status to low
impedance. (Sets the output voltage to 0 V and the current
limit to the setting current limit value.)
2)
Response
Sets the voltage source response.
Extra Fast
Sets the voltage source response to extra fast speed.
Fast
Sets the voltage source response to high speed.
Medium
Sets the voltage source response to medium speed.
Slow
Sets the voltage source response to low speed.
3)
Limit Input
Changes the current limit setting mode.
±Balanced
Sets the high and low current limits to the same values
with different polarities.
Individual
Sets the high and low current limits separately.
B)
SWEEP
Sets the sweep type and the sweep-related parameters.
1)
Sweep Type
Sets the sweep type.
1-Slope Linear
Selects 1-slope linear sweep.
2-Slope Linear
Selects 2-slope linear sweep.
3-Slope Linear
Selects 3-slope linear sweep.
Fixed Level
Selects fixed level sweep.
Memory
Selects memory sweep.
2)
Sweep Range
Sets the voltage source range for sweep operation.
5.0000 V
Selects the 5 V range.
50.000 V
Selects the 50 V range.
300.00 V
Selects the 300 V range.
