4601 I-V Meter Operation Manual
6. REMOTE PROGRAMMING
6-1
6.
REMOTE PROGRAMMING
6.1
Using Interface
The 4601 offers GPIB and USB interfaces.
They cannot be used at the same time. Select which interface you wish to use.
6.1.1
Selecting Interface
The interface can only be selected from the front panel menu.
1. The selected interface is saved in the nonvolatile memory. The selected interface does not change
when the unit is turned off or the interface is reset.
2. A unique unit address is set in the interface. If multiple instruments are connected to the USB
interface, set individual identifying addresses (USB ID).
The following table shows the interface set items and default settings.
To set the interface, select
H) INTERFACE
1) Interface Bus
.
To set the header ON/OFF, select
H) INTERFACE
3) Header
.
Set item
Default setting
Selected interface
GPIB
Header ON/OFF
ON
GPIB address/USB ID
1
GPIB Talker Functions
Addressable
