4601 I-V Meter Operation Manual
3.3.2 Checking Measured Values
3-13
Example display
When sweep ends,
RUN
disappears and the screen returns to the display before start. The measured
data is stored in the measurement memory. For more information, refer to Section 5.3.7, "Measure-
ment Data Memory."
Press .
The
OPERATE
key goes OFF.
3.3.2
Checking Measured Values
Press .
The
MENU
key goes ON.
Example display
Press
four times to show the following display.
Example display
Press .
Example display
Press .
Example display
Rotate the rotary knob to check the measured value at each step.
Example display
Press .
The
MENU
key goes OFF, and the screen returns to the sweep source mode screen.
4
5
6
7
8
9
10
