4601 I-V Meter Operation Manual
2.1.3 MODE Section
2-3
2.1.3
MODE Section
Figure 2-4 MODE Section
1.
MODE
key
Switches between the DC source mode and the sweep source
mode.
2.1.4
MEASURE Section
This section is used to switch the measurement function and the range displayed in the lower right on the
screen in the DC source mode.
Figure 2-5 MEASURE Section
1.
FUNCTION
key
Selects from the following eight functions for ADC3 measurement in
the DC source mode (Refer to Section 4.2.7).
Ir
: Reference cell current measurement
Em : External voltage measurement
Tc1 : Ch1 T-type thermocouple measurement
Pt1 : Ch1 resistance bulb (Pt) temperature measurement
Ad1 : Ch1 IC sensor AD590 temperature measurement
Tc2 : Ch2 T-type thermocouple measurement
Pt2 : Ch2 resistance bulb (Pt) temperature measurement
Ad2 : Ch2 IC sensor AD590 temperature measurement
2.
DOWN
key
Lowers the reference cell current measurement range or external
voltage measurement range.
Ir
: 3 mA, 30 mA, 300 mA
Em : 30 mV, 300 mV, 3 V
3.
UP
key
Raises the reference cell current measurement range or external
voltage measurement range.
1
2
3
1
