manualshive.com logo in svg

Acer s10, Manual, Page: 244 / 338

Share
Download
Acer s10 Manual Download Page 244

8   U s i n g   t h e   A t t e n t i o n   M a n a g e r

Subtle alarms

226  

 

The Reminders list screen displays three buttons that are used to respond to all of the 
items in the list:

For more detail, see “Understanding the blinking alarm indicator” below.

Subtle alarms

Some applications provide a visual, and an optional audible indication, but do not 
otherwise disrupt your workflow. Subtle alarms do not display a Reminders screen. 
Instead, a blinking indicator will flash in the upper left corner of the title bar (in 
applications that allow it) when an alarm is activated. 

Understanding the blinking alarm indicator

A blinking alarm indicator appears in the upper left corner of the screen in the menu 
bar (in applications that allow it) under the following conditions:

• While viewing a Reminders dialog screen, you tap the Done or the Snooze 

button.

• A subtle alarm is present.

The indicator appears in three different states:

•

Off

. The indicator is not shown at all when the list is empty.

•

Blinking, two states

: When the list is not empty and there are no new 

items, the “star” indicator will blink on and off until the list has been 
emptied.

Snooze

Puts the Reminders list screen to sleep for five minutes. After this 
time interval, the Reminders list screen is displayed again. You 
can go directly to the Reminders list screen without waiting, by 
tapping the blinking alarm indicator. 

Done

If the Reminders list appeared because of more than one 
insistent alarm, tapping Done closes the Reminders list screen, 
although the events will remain in the application that created 
them. The Reminders list screen will not appear again, unless you 
tap the blinking alarm indicator in the menu bar.

If the Reminders list appeared after you tapped the Snooze 
button, then tapped the blinking alarm indicator, then tapped 
the Done button, thereminder continue to snooze.

Clear All

Removes all the items from the list, but does not close the 
Reminders screen. Tap this button to erase a list of events that 
have passed.

Summary of Contents for s10



















































































































































































































































































































































Reviews:

No comments