Acer s10 Manual Download Page 161

Page: 161 / 338

W o r k i n g w i t h y o u r s u p p l e m e n t a r y a p p l i c a t i o n s

Using AudioBox

143

Tap the LCD off After pick list to display the time interval options. These include:

To repeat a section of the active track:

During playback, tap

to select the starting point of the track section to be

repeated.

NOTE:

The

function is only active during playback mode; otherwise, the button is

grayed out to indicate it is disabled.

Tap

again to select the end point of the track section to be repeated.

The selected section would then be repeatedly played until

is tap again.

To adjust the volume:

Do one of the following:

• Tap on the volume bar.

Never

The LCD backlight will remain on all throughout the
playback period. This setting requires the highest demand
on battery consumption.

1 minute

The LCD backlight automatically turns off one minute after
playback begins.

2 minutes

The LCD backlight automatically turns off two minutes after
playback begins.

3 minutes

The LCD backlight automatically turns off three minutes
after playback begins.

Summary of Contents for s10



















































































































































































































































































































































Search results

Summary of Contents for s10

Reviews:

Acer s10, Manual, Page: 161 / 338

Search results

Summary of Contents for s10

Reviews: