Acer s10 Manual Download Page 140

Page: 140 / 338

5 W o r k i n g w i t h y o u r s u p p l e m e n t a r y a p p l i c a t i o n s

eBook Reader

122

In the Utilities screen of Applications Launcher, tap the eBook Reader icon

The Book Manager screens appears.

Book Manager lists the filenames of the available eBooks.

indicates that the eBook is stored in your Acer s10’s internal memory.

indicates that the eBook is stored in the resident

Memory Stick

NOTE:

The first time you successfully open the Book Manager, it will highlight the first

eBook in your file list. Afterwards, it will highlight the last eBook you opened.

When the eBook Reader icon is tapped but no eBook file is detected, either on the
Acer s10’s internal memory or on a resident

Memory Stick

, a warning message pops

up.

Tap OK to close the application.

Do one of the following before attempting to use eBook Reader again.

• Perform a HotSync operation to install an eBook file from your computer to

your Acer s10.

See page 253 for more information on HotSync operations.

Summary of Contents for s10



















































































































































































































































































































































Search results

Summary of Contents for s10

Reviews:

Acer s10, Manual, Page: 140 / 338

Search results

Summary of Contents for s10

Reviews: