manualshive.com logo in svg

Acer s10, Manual, Page: 242 / 338

Share
Download
Acer s10 Manual Download Page 242

8   U s i n g   t h e   A t t e n t i o n   M a n a g e r

Insistent alarms

224  

 

Setting the alarm volume

You control most alarm volumes globally in the General panel of the Prefs menu:

1

Tap the Applications icon 

, and then tap the Prefs icon 

.

2

Tap the General pick list in the upper right corner of the screen.

3

Set the volume using the Alarm Sound pick list. 

NOTE:

Your Acer s10 has a LED indicator which you can set to flash when an alarm is 

activated by toggling the Alarm LED setting on and off. 

Setting alarm sound effects

Some applications allow you to set a song or a sound effect to use as an alarm, 
determine how many times to play it, with a pause in between. For example, to set 
alarm preferences for a Date Book alarm, do the following:

1

In Date Book, tap the Menu icon 

.

2

Tap the Options menu. 

3

Select Preferences to display the Preferences screen. 

OK

Tap to make the reminder go away, with no further 
notification.

Snooze

 

Tap to switch to the application that was running when the 
alarm went off. The Reminder dialog screen will again be 
displayed after five minutes.
You can go back to the Reminder dialog screen right away by 
tapping on the blinking indicator in the upper left corner of 
the screen. For more information, see “Understanding the 
blinking alarm indicator” later in this chapter.

Go To

Tap to switch to the application that created the alarm, and 
show the record that caused the alarm. You may have to 
navigate within the application. There will be no further 
notification.

Summary of Contents for s10



















































































































































































































































































































































Reviews:

No comments